XK-550 Open mixing mill+FL
A. Main technical specifications
1.Diameter of working part of roller 550mm
2.Length of working part of roller 1500mm
3. Back roller speed (fast roller) 17.5rpm
4. Front roller speed (slow roller) 14.96rpm
5. Front roller line speed (slow roller) 25.84 m/min
6. Roller speed ratio (front roller: back roller) 1:1.17
7. Roller structure Hollow light roller of front and rear rollers
8.Motor power 110kw,380V,50 Hz
9. Feeding quantity 60～90kg at one time
10. Pressure at the time of destruction of safety sheet 1100±30kN
11. Roller bearings Roller bearings
12. Roller bearing lubrication method: manual dry grease lubrication.
13. Rubber blocking plate form Double-side hydraulic rubber blocking plate
14. Pitch adjustment mode Electric pitch adjustment
15.Pitch adjustment range of moving rollers 0.5～15mm (static)
16.Reducer Single in single out shaft
17. Cutter device Pneumatic disk cutter, two
18. Temperature control medium consumption (cooling water) ～12 m3/h
19. Material turning device
Traction roller speed 4～40m/min
Traction motor power 4.0kW (AC frequency conversion)
Oscillation speed 2～3 times/min
Oscillation amplitude 1080 mm
Swinging form hydraulic swing rubber
20.Overall dimensions (L×W×H) ～6060×2150×2400 mm
21.Weight ～20.55 t
22.Transmission direction of the whole machine Right transmission (facing the discharge direction motor on the right side)