1.Composition of the machine

This machine consists of a XJD-90×12D pin barrel cold feeding rubber extruder, electrical system, temperature control system, rubber supply head and its auxiliary machines.PIN COLD FEEDING RUBBER EXTRUDER

2.Uses of the machine

This machine is used for extrusion molding of rubber rubber strips.IN COLD FEEDING RUBBER EXTRUDER

3.Applicable standard

The design and production of this unit conform to the national standards.

4.Color

Customize

5.Applicable conditionsIN COLD FEEDING RUBBER EXTRUDER

This unit has standard plant conditions at an altitude of ≤1000m.BAOFENGMMC

6.Power RequirementsBAOFENGMMC

Power supply: 380V, 50Hz three-phase AC power supplyBAOFENGMMC

Cooling water: Tap water≤26℃

Water pressure 0.2～0.3 Mpa

Factory softened water: 0.2～0.3 MpaBAOFENGMMC

Air source: 0.6～0.8 MpaBAOFENGMMC

7.The following items are not included in the scope of deliveryBAOFENGMMC

1)Factory building and external power supply wiringl;IN COLD FEEDING RUBBER EXTRUDER

2)The basis of the equipment. Installation and materials used;IN COLD FEEDING RUBBER EXTRUDER

3)Wiring from the main power supply to the control cabinet;IN COLD FEEDING RUBBER EXTRUDER

4)Wiring between the control cabinet and the unit, cables and bridges;IN COLD FEEDING RUBBER EXTRUDER

5)The connecting pipeline and valve between the external power source (cooling water) and the unit.

6)The connecting pipes and joints between the temperature control device and the main engine unit

7)Lubricating oil, hydraulic oilBAOFENGMMC